Product Description Wood Burning Kit 77pcs Wood Burning Pyrography Kit,Creates Your Own Artwork! This can be easily used by wood burning beginners: *Perfect wood burning kit for soldering, cutting, and carving a variety of surfaces, such as wood, leather, and card. that meets the needs of beginner, pyrograph artists, amateurs,hobbyists, artisans and fine artists. Instructions: 1. Long press the red “*” button for 3~5 seconds to turn on/off the pen. 2. Adjust temperature by pressing “+” or “-” button. The temperature increase or decrease 9°F/5°C per press. After setting, temperature will be saved. 3. Temperature on the LCD screen will stop flicker after reaching the setting temperature. At that time, the pen will be in temperature constant state. And the “°F” (°C) marker will keep flickering . 4. After required temperature showing up in LCD screen, please wait for a little while for heating up pen’s tip. Then go on with your DIY project, you’ll get best results. 5. Press temperature adjustment button “+” and “-” at same time after activated the pen, the degree showing on LCD screen can be switched from celsius to fahrenheit or fahrenheit to celsius. Assembly and disassembly Unscrew and remove the protective hoseSlide the converter onto the heaterReset the thermal iron shell and then tightenChoose one of the wood burner tips and you’re done Warning & Attention: 1. It is a normal phenomenon that smoke comes out when you are using this product, especially for the first use, please do not worry. 2. Tips(Points) are made of copper which transfer heat fast but flimsy after warmed up. Please DO NOT apply excessive pressure when using. 3. Tips(Points) are likely oxidized to black. Using emery to clean it firstly, then turning on power for heating, putting on tin immediately, you can clean the oxide. Extra Head Converters Head Converter could be damaged easily. So we add two extra replacement Pens Head Converter in the package. Extended the pen’s service life Warm Tips Please be really careful when you are using the tools in avoidance of pricks or other injuries. You’d better keep it somewhere kids can’t reach.The iron heats up fast, so please select a suitable temperature. Working for long hours and high temperature may shorten its life. Do not touch the metal part of the soldering iron to guard against burns.Do not allow the iron to idle at operating temperatures for extended periods. This could burn the soldering iron and even other thing.When installing or replacing the soldering iron parts, it must be done after disconnecting the power supply. It must be installed or replaced after the soldering iron is cooled.Do not hit the soldering iron on the work surface to remove solder residue, which may seriously damage the soldering iron.Smoke will occur when welding. Please make proper ventilation preparations.After turning on the soldering iron.Do not use near flammable or explosive gases or objects.
About this item 【Pyrography Packaging】 1× LCD digital display pyrography engraver pen,15× assorted wood burning and soldering tips,10× assorted wood carving tips,5× assorted wood embossing tips,1× hot knife chuck,1× blade,12x color pencils,12× mold,10x carbon paper,6x wood chips,1x pencil sharpener,1x soldering holder with cleaning sponge,1x carry bag and 1x user manual. 【Adjustable Temperature & Quick Heating】With 31 different welding embossing tips and accessories, it’s suitable for all skill levels, such as wood burning beginners, experienced experts, and so on. It works at adjustable temperatures, from 356℉~896℉/180℃~480℃ (you can adjust 9℉/5℃ per use). The inner-heated ceramic technology allows for quickly heating (in 15 seconds) for energy-saving and environmental protection. 【Artistic creation】This perfect wood kit burning allows you to create on all types of wood or leather. In addition, it is useful for various designs, such as image transfer, formwork cutting, welding, hot stamping, and textile embossing. 【Ergonomic design】The lightweight, ergonomic handle, of the burning set, allows you to operate it at different angles, without fatigue. The high-temperature protective case protects you while working on the pyrography project (for hours), without sweating. 【Portability and storage】Our wooden engraving tool comes with a high-quality zippered purse that can store all the parts without loss or damage, and it is easy to carry. › See more product details Product Description Wood Burning Kit 77pcs Wood Burning Pyrography Kit,Creates Your Own Artwork! This can be easily used by wood burning beginners: *Perfect wood burning kit for soldering, cutting, and carving a variety of surfaces, such as wood, leather, and card. that meets the needs of beginner, pyrograph artists, amateurs,hobbyists, artisans and fine artists. Instructions: 1. Long press the red “*” button for 3~5 seconds to turn on/off the pen. 2. Adjust temperature by pressing “+” or “-” button. The temperature increase or decrease 9°F/5°C per press. After setting, temperature will be saved. 3. Temperature on the LCD screen will stop flicker after reaching the setting temperature. At that time, the pen will be in temperature constant state. And the “°F” (°C) marker will keep flickering . 4. After required temperature showing up in LCD screen, please wait for a little while for heating up pen’s tip. Then go on with your DIY project, you’ll get best results. 5. Press temperature adjustment button “+” and “-” at same time after activated the pen, the degree showing on LCD screen can be switched from celsius to fahrenheit or fahrenheit to celsius. Assembly and disassembly Unscrew and remove the protective hoseSlide the converter onto the heaterReset the thermal iron shell and then tightenChoose one of the wood burner tips and you’re done Warning & Attention: 1. It is a normal phenomenon that smoke comes out when you are using this product, especially for the first use, please do not worry. 2. Tips(Points) are made of copper which transfer heat fast but flimsy after warmed up. Please DO NOT apply excessive pressure when using. 3. Tips(Points) are likely oxidized to black. Using emery to clean it firstly, then turning on power for heating, putting on tin immediately, you can clean the oxide. Extra Head Converters Head Converter could be damaged easily. So we add two extra replacement Pens Head Converter in the package. Extended the pen’s service life Warm Tips Please be really careful when you are using the tools in avoidance of pricks or other injuries. You’d better keep it somewhere kids can’t reach.The iron heats up fast, so please select a suitable temperature. Working for long hours and high temperature may shorten its life. Do not touch the metal part of the soldering iron to guard against burns.Do not allow the iron to idle at operating temperatures for extended periods. This could burn the soldering iron and even other thing.When installing or replacing the soldering iron parts, it must be done after disconnecting the power supply. It must be installed or replaced after the soldering iron is cooled.Do not hit the soldering iron on the work surface to remove solder residue, which may seriously damage the soldering iron.Smoke will occur when welding. Please make proper ventilation preparations.After turning on the soldering iron.Do not use near flammable or explosive gases or objects.