Makita DWD181ZJ 14.4V/18V Li-ion LXT Wall Scanner Supplied in a Makpac Case - Batteries and Charger Not Included

From the manufacturer Makita DWD181ZJ Ideal for efficient and accurate detection of a wide surface area with a large 4.1 inch screen Powered by either 14.4V or 18V Li-ion LXT slide type battery (not included) Multi-detection mode Scene mode selection IP54 dust and drip proof design Maximum depth detection in concrete 180mm, plastic pipe in concrete (water filled/empty) 120mm Maximum depth detection live cables 120mm, wood stud behind drywall 25mm Not compatible with G-Series batteries The DWD181ZJ features multi-detection mode; up to 3 detection results can be displayed on a split screen at any one time, laser guide; emits laser lines to indicate the vertical centre of the sensor and the axis off the scan direction and scene mode selection; dry concrete, wet concrete, partition mode and radar view mode. Dry concrete mode for detecting rebars or plastic pipe in dry concrete, wet concrete mode for detecting rebars or plastic pipe in wet concrete, partition mode for detecting studs or steel frame behind wood or drywall and radar view mode for detecting composite objects such as rebars and cavities in concrete, block or brick walls. The DWD181ZJ is not compatible with G-Series batteries. Makita DWD181ZJ 14.4V/18V Li-ion LXT Wall Scanner supplied in a Makpac Case – Batteries and Charger Not Included The DWD181ZJ is a cordless Wall Scanner, with a large 4.1 inch screen, powered by Li-ion LXT 14.4V or 18V slide type battery (not included), ideal for efficient and accurate detection of a wide surface area, with high detection accuracy. An LED job light illuminates around the wall scanner and the scanning area in the direction of moving to allow for accurate object detection in poor light. The DWD181ZJ is equipped with a control panel, operable with one hand whilst holding the handle; with power button, detection mode change and setting button, full colour display to indicate the object position, depth and more, indication of detection status; the presence of the object is indicated visually and acoustically and also detects objects embedded in concrete frame, for example live electric cables, plastic pipes and more.
Ideal for efficient and accurate detection of a wide surface area with a large 4.1 inch screen Powered by either 14.4V or 18V LXT battery (not included) Full colour display with LED job light illuminates around the wall scanner and the scanning area Multi-detection mode; up to 3 detection results can be displayed on a split screen at any one time Scene mode selection; dry concrete, wet concrete, partition mode and radar view mode IP54 dust and drip proof design for use in harsh conditions Detects objects embedded in concrete frame Maximum depth detection in concrete 180mm, plastic pipe in concrete (water filled/empty) 120mm, live cables 120mm and wood stud behind drywall 25mm Detectcable minimum distance between two adjacent objects 40mm Not compatible with G-Series batteries Show More From the manufacturer Makita DWD181ZJ Ideal for efficient and accurate detection of a wide surface area with a large 4.1 inch screen Powered by either 14.4V or 18V Li-ion LXT slide type battery (not included) Multi-detection mode Scene mode selection IP54 dust and drip proof design Maximum depth detection in concrete 180mm, plastic pipe in concrete (water filled/empty) 120mm Maximum depth detection live cables 120mm, wood stud behind drywall 25mm Not compatible with G-Series batteries The DWD181ZJ features multi-detection mode; up to 3 detection results can be displayed on a split screen at any one time, laser guide; emits laser lines to indicate the vertical centre of the sensor and the axis off the scan direction and scene mode selection; dry concrete, wet concrete, partition mode and radar view mode. Dry concrete mode for detecting rebars or plastic pipe in dry concrete, wet concrete mode for detecting rebars or plastic pipe in wet concrete, partition mode for detecting studs or steel frame behind wood or drywall and radar view mode for detecting composite objects such as rebars and cavities in concrete, block or brick walls. The DWD181ZJ is not compatible with G-Series batteries. Makita DWD181ZJ 14.4V/18V Li-ion LXT Wall Scanner supplied in a Makpac Case – Batteries and Charger Not Included The DWD181ZJ is a cordless Wall Scanner, with a large 4.1 inch screen, powered by Li-ion LXT 14.4V or 18V slide type battery (not included), ideal for efficient and accurate detection of a wide surface area, with high detection accuracy. An LED job light illuminates around the wall scanner and the scanning area in the direction of moving to allow for accurate object detection in poor light. The DWD181ZJ is equipped with a control panel, operable with one hand whilst holding the handle; with power button, detection mode change and setting button, full colour display to indicate the object position, depth and more, indication of detection status; the presence of the object is indicated visually and acoustically and also detects objects embedded in concrete frame, for example live electric cables, plastic pipes and more.